Nameplates

From Davidbond.net

Jump to: navigation, search

I've made a "Rachael" and a "Thomas" nameplate now. These are simple to make using:

  • 3/4" MDF
  • Acrylic paint
  • Scroll Saw (mine was £35 from B&Q)

Simply draw your design on the MDF and cut out the shape! holes in R's e's, a's etc. are made using a power drill (4mm bit). The finished piece is about 20cm long!

Image:Rachael nameplate.jpg

Retrieved from "http://www.davidbond.net/index.php/Nameplates"